A boiler losing pressure is one of the calls we get most across Bridgend. The good news is that the rate of loss is the diagnosis, and you can work most of it out before anyone arrives.
What normal looks like
- 1 to 1.5 bar on the gauge when the system is cold.
- Rising to around 2 bar when the heating is running.
- Topping up once or twice a year, or after bleeding radiators, is nothing to worry about.
Systems lose a little over months. That is simply normal, and a top-up on the filling loop to about 1.5 bar cold is all it needs.
When it is a fault
Make a note of the date every time you top up. Within a month you will know which of these you are:
- Every few weeks: water is going somewhere. A leak on the pipework or a radiator, or a weeping pressure relief valve.
- Every few days: find it now. Every top-up puts fresh, oxygenated water into the system, which corrodes it from the inside and creates the sludge that later blocks radiators. Topping up is costing you more than the repair would.
- High when hot, low when cold: if the gauge swings well over 2 bar with the heating on and sits under 1 bar cold, the expansion vessel has lost its air charge. That is a recharge or a replacement, and no amount of topping up will fix it.
Three things to look at yourself
- The small copper pipe outside, near the boiler. If it is dripping or there is staining under it, the relief valve is passing and that is where your water is going.
- Under every radiator and around the valves. Look for staining or damp. That is the other common source.
- The gauge, hot and cold. Note both readings. It tells us whether to bring a vessel or go looking for a leak.
What we do
On a boiler repair visit we find which of the two it is, a leak or the vessel, before we quote. Most leaks at a few-weeks rate are found on the same visit and are not dramatic. Topping up weekly is treating the symptom. Finding the cause is the repair.
Over 2.5 bar when hot is also worth a call. It usually points at the vessel.
Booking
Tell us how often you are topping up and what the gauge does when the heating runs. That usually tells us which of the three it is before we arrive. Book a boiler repair, or read what to expect on a repair visit and what it costs.
Keep reading
- What does a boiler repair in Bridgend cost? Why we do not publish one repair price, how a boiler repair in Bridgend gets priced, and how to make sure nothing lands on the invoice afterwards.
- Boiler showing a fault code? What to do first Your boiler has locked out with a code on the display. The three checks to make, the one reset you are allowed, and when to stop and call.
- Heating works but no hot water? Here is the usual cause Lost one half of your combi but not the other? Which half you still have is the best clue there is. What it usually means, and what to check first.